Evora-RL2R
- Barrel scanner with 2R lamp
Page 14
English
Edit Scene
Scene 1
Scene 2
....
Scene 250
• Auto Program,
PAN, TILT Fine,
...
• Scene Time
• Fade Time
• Input By Out
This submenu allows you to edit one of the 250 scenes.
Select a scene and press ENTER.
Sélect each function (PAN, TILT, ...etc) and press ENTER, then
assign a value included between 000 and 255 to each function.
Then indicate the scene duration (in seconds) and the fade out
duration.
The Input By Out function allows you to receive a scene sent by
a DMX controller.
Rec Controller
XXX - XXX
This submenu allows you to automatically record a scene sent
by a DMX controller.
You can store up to 250 scenes.
Indicate the number of scenes you want to save, precising the
opening and ending scenes.
The opening scene selection uses the left and right arrow
buttons.
The ending scene selection uses the up and down arrow
buttons.
Press ENTER. The moving head now awaits incoming scenes
from the DMX controller.
More details about program groups sequencing and scenes they include:
Example :
Program 2 includes scenes 10, 11, 12 and 13
Program 4 includes scenes 8, 9 and 10
Program 6 includes scenes 12, 13, 14 and 15
Auto Pro Part 1 is assigned to program 2
Auto Pro Part 2 is assigned to program 4
Auto Pro Part 3 is assigned to program 6
The 3 slave groups will run the programs according to the same number of steps as follows:
Scene 10
Scene 11
Scene 12
Scene 13
Scene 8
Scene 9
Scene 10
Scene 8
Scene 12
Scene 13
Scene 14
Scene 15
