ICC-STA Specifications
Physical
Size:
11.475" [291.5mm] wide x 1.30" [33mm] height x 5.1" [129.5mm] deep
Weight:
1.5 lbs [0.68kg]
Enclosure:
All aluminum with durable black powder coat paint
Mounting:
8/32 self-clinching nuts are provided on the bottom and sides
Mounting bolts should not protrude into the enclosure more than ¼ inch
Connections
Power In:
2.1mm coaxial jack (inside center conductor PWR+)
DB-9 male connector for locked power connection, identical to coaxial input
Pin 4 = PWR+
Pin 5 = GND
15 to 30 VDC, 24 VDC typical (may be unregulated)
130 mA @24 VDC (no load, audio muted)
210 mA @24 VDC (full volume to headphone/speaker)
300 mA @24 VDC (ICA-FT6 panel, full volume to headphone/speaker)
North American version includes UL/CSA listed wall power supply
Panel/Control:
DB-25 female for panel and audio connections, includes RS-232, power and
solid-state contact closure inputs and outputs.
Indicators:
LEDS indicate operation status
Net:
Green LED for iCC-Net bus, flashes once per second if active
COM:
Yellow LED stays on, flashes when receiving control data
ERR:
Red LED indicates a problem within the unit
Terminal:
RJ-11 input for RS-232 control, 1200 baud, 8 data bits, no parity, and 1 stop bit
Communication is linked with the Panel/Control RS-232 port so the Terminal port
can be used to monitor and mimic control panel operation
Pin 1 = TX
Pin 2 = RX
Pin 5 = GND
RF In:
BNC female, 75 ohm impedance
External Inputs:
Video - RCA female jack, NTSC composite
Audio – 2 RCA female jacks, unbalanced stereo, 20K ohms impedance
A/V Outputs:
Video - RCA female jack, NTSC composite
Audio – 2 RCA female jacks, unbalanced stereo, 1K ohms impedance
Contemporary
Research
4
ICC-STA/ICA-FT6