manualshive.com logo in svg

Contec SPC-8450-LVA, Руководство пользователя

Поделиться
Скачать
Contec SPC-8450-LVA Скачать руководство пользователя страница 77

7. BIOS Setup

                                                                                                                                               

 

70

SPC-8450-LVA

Error Messages

One or more of the following messages may be displayed if the BIOS detects an error during the POST.
This list includes messages for both the ISA and the EISA BIOS.

CMOS battery has failed

CMOS battery is no longer functional. It should be replaced.

CMOS checksum error

Checksum of CMOS is incorrect. This can indicate that CMOS has become corrupt. This error may have
been caused by a weak battery. Check the battery and replace if necessary.

DISK BOOT failure

INSERT SYSTEM DISK AND PRESS ENTER

No boot device was found. This could mean that either a boot drive was not detected or the drive does not
contain proper system boot files. Insert a system disk into Drive A: and press <Enter>. If you assumed the
system would boot from the hard drive, make sure the controller is inserted correctly and all cables are
properly attached. Also be sure the disk is formatted as a boot device. Then reboot the system.

Diskette drives or types mismatch error

RUN SETUP

Type of diskette drive installed in the system is different from the CMOS definition. Run Setup to
reconfigure the drive type correctly.

Display switch is set incorrectly

Display switch on the motherboard can be set to either monochrome or color. This indicates the switch is
set to a different setting than indicated in Setup. Determine which setting is correct, and then either turn
off the system and change the jumper, or enter Setup and change the VIDEO selection.

Display type has changed since last BOOT

Since last powering off the system, the display adapter has been changed. You must configure the system
for the new display type.

EISA configuration checksum error

PLEASE RUN EISA CONFIGURATION UTILITY

The EISA non-volatile RAM checksum is incorrect or cannot correctly read the EISA slot. This can
indicate either the EISA non-volatile memory has become corrupt or the slot has been configured
incorrectly. Also be sure the card is installed firmly in the slot.

EISA configuration is not complete

PLEASE RUN EISA CONFIGURATION UTILITY

The slot configuration information stored in the EISA non-volatile memory is incomplete.

Note: When either of these errors appear, the system will boot in ISA mode, which
allows you to run the EISA Configuration Utility.

Error encountered initializing hard drive

Hard drive cannot be initialized. Be sure the adapter is installed correctly and all cables are correctly and
firmly attached. Also be sure the correct hard drive type is selected in Setup.

Содержание SPC-8450-LVA




























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды