Contec PT-E731, Руководство пользователя

Страница: 49 / 120

6 Setting the Touch panel Driver
48
PT-E731, PT-E731S, PT-E731H, PT-E731HS User’s Manual
(4) When all calibration points’ settings are completed, a dialog box for calibration confirmation is
displayed.
If no problem occurs on any calibration point, clicks [OK] to finish the calibration.
If make a mistake in point except the calibration points, doing nothing but waiting 10 seconds. After
10 seconds passed, the calibration data are canceled and they are not saved in the Windows.
Figure 6.4 Check calibration window
Calibration Settings When Using EEPROM Calibration
Calibration setting that uses EEPROM calibration saves the calibration data in EEPROM within PT-E.
Because the calibration data are saved in EEPROM, the calibration setting condition is identical for the
same PT-E. Don’t need to do calibration again even though exchange start-up disk.
(1) Click [Start] on taskbar.
Move the cursor to [All Programs (P)] and click [Operation Setting].
Click here.
Figure 6.5 Settings button