Contec PC-686CPCI-LV, Руководство пользователя

Страница: 100 / 118

CHAPTER 6 - BIOS SETUP
92 PC-686 (CPCI)-LV User’s Manual
6.10. Supervisor/User Password Setting
You can set either supervisor or user password, or both of then. The
differences between are:
SUPERVISOR PASSWORD: can enter and change the options of the setup menus.
USER PASSWORD : just can only enter but do not have the right to change the
options of the setup menus. When you select this unction, the following message will
appear at the center of the screen to assist you in creating a password.
ENTER PASSWORD: Type the password, up to eight characters in length, and press
<Enter>. The password typed now will clear any previously entered password from
CMOS memory. You will be asked to confirm the password. Type the password
again and press <Enter>. You may also press <Esc> to abort the selection and not
enter a password.
To disable a password, just press <Enter> when you are prompted to enter the
password. A message will confirm the password will be disabled. Once the
password is disabled, the system will boot and you can enter Setup freely.
PASSWORD DISABLED: When a password has been enabled, you will be prompted
to enter it every time you try to enter Setup. This prevents an unauthorized person
from changing any part of your system configuration.
Additionally, when a password is enabled, you can also require the BIOS to request a
password every time your system is rebooted. This would prevent unauthorized use
of your computer.
You determine when the password is required within the BIOS Features Setup Menu
and its Security option (see Section 3). If the Security option is set to “System”, the
password will be required both at boot and at entry to Setup. If set to “Setup”,
prompting only occurs when trying to enter Setup.
Note: Once you register the Password, you can't cancel the Password
function if you don't have the Password. Please be careful to treat
the password.