Contec GPIB-F-LPE, Руководство пользователя

Страница: 60 / 63

6. About Hardware
GPIB-F-LPE, GPIB-FL-LPE
53
6. About Hardware
This chapter provides hardware specifications and hardware-related supplementary information.
For detailed technical information
For further detailed technical information (“Technical Reference” including the information such as an
I/O map, configuration register, etc.), visit the Contec's web site (http://www.contec.com/support/) to
call for it.
Hardware specification
The following tables list the hardware specifications of the board.
Table 6.1. Specification
Item GPIB-F-LPE GPIB-FL-LPE
GPIB
Number of channel
1 channel
Conforms to IEEE-488.1, 488.2(GPIB)
standards
Transfer format 8-bit parallel, 3-wire handshake system
Transfer rate 1.5Mbyte/sec
Data buffer size 2Kbyte send, 2Kbyte receive
Signal logic
Negative logic L level : 0.8V or less,
H level : 2.0V or more
Cable length between device 4m or less *1
Total cable length 20m or less
Connectable number of device 15 devices
Analyzer buffer size
64K data points
(1 data point : Control s
DIO1 - 8)
None
Bus master section
DMA channels 2 channels
Transfer bus width 32-bit
Transfer data length 8 PCI Words length (Max.)
Transfer rate 80Mbyte/sec
Scatter/Gather function 64Mbyte/ch
Common section
I/O address Any 128-byte boundary
Interrupt 1 level use
Consumed current (Max.) 3.3VDC 600mA
Operating conditions 0 - 50°C, 10 - 90%RH (No condensation)
Bus specification
PCI Express Base Specification Rev.
1.0a x1
External dimensions (mm) 121.69(L) x 67.90(H)
Connector used
Micro ribbon connector (24-pin)
5555139-1 [made by AMP] or equivalent
Weight 80g
*1 For details, see item (2) in Chapter3, "Connecting Cables".