Contec FX-DS540-APDL-U, Руководство пользователя

Страница: 63 / 91

5. Setup and Status Display
56
FX-DS540-APDL-U
Network time
Enabling the network time function can synchronize the access point time with the network time. The
factory default setting is “disable”.
Before you can enable this function, you have to set the IP address and time zone of a network time
server on the network. (Example: For use in Japan, enter “+09:00” (meaning UTC + 9 hours) as the
Japan standard time is nine hours ahead of Universal Time Coordinated (UTC).)
Factory default setting : function …Disable
IP address … 0.0.0.0
Time zone … +09:00
Access control
Set the access control for the access point. Disabling TELNET, FTP, WEB server function can be
refecte the connection to each server. Disabling all sets, it cannot be connected to Access point.
Enabling specification of administrator IP, you can specify the IP address to connect to TELNET, FTP,
WEB. Up to two administrator IP addresses can be registered in “Administrator IP address 1” and
“Administrator IP address 2”. When using this function, you need to enable TELNET server function.
When the disabled IP address is not registered, connection to TELNET, FTP, WEB by using access point
cannot be done.
Factory default setting : TELNET / FTP / WEB server function …Disable
Administrator IP addresse …Disable
Administrator IP addresse 1 to 2 …0.0.0.0
SNMP
SNMP agent function
Set this item to “enable” to enable SNMP.
Factory default setting : Disable.
Community name
Enter the SNMP authentication string. The SNMP authentication string serves as a password to access
the AP using SNMP. Programs use this community name to access the AP’s MIB.
Enter a string of up to 32 single-byte alphanumeric characters. The community name is case sensitive.
Factory default setting : public
Access permission
Set the access permission for the community. Select “Read/Write” or “Read Only”. The factory default
setting is “Read/Write”.
Factory default setting : Read / Write