1 Before Using the Product
CPS-PCS341EC-DS1-1201 Hardware Manual
5
cord immediately and contact your retailer.
- To connect with peripherals, use a grounded, shielded cable.
- To clean this product, wipe it gently with a soft cloth dampened with either water or mild detergent.
Do not use chemicals or a volatile solvent, such as benzene or thinner, to prevent pealing or
discoloration of the paint.
- Avoid using or storing this product in locations subject to shock or vibration that exceeds range of
specification.
- Avoid transporting this products state to shock or vibration that exceeds range of specification.
Impact resistance: 15G (11ms) below
- Use the product in the specified operating condition (temperature, humidity, vibration and shock)
- Please be grounded (earth) always.
-
Please adjust the air current to prevent the reject heat from the product staying around the product.
- When connecting cables, first check the shapes of connectors (such as USB connectors), and then
insert them in the correct orientation. After they are connected, do not put too much load on the
connected part. Doing so may result in poor contact or damage to this product and the connected part.
- Do not touch metal parts or terminals of the product with your hands in operation. Otherwise, this
product may malfunction, overheat, or cause a failure.
- To avoid electric shock, please do not touch the system with a wet hand.
- The specification of this product is subject to change without notice for enhancement and quality
improvement. Even when using this product continuously, be sure to read the manual of CONTEC’s
website and understand the contents.
- If you want to use in places where the influence of the overcurrent or overvoltage is, please select
appropriate surge protection device for all of the route (Power line, signal line, earth, etc.)
- Regardless of the foregoing statements, CONTEC is not liable for any damages whatsoever
(Including damages for loss of business profits) arising out of the use or inability to use this
CONTEC product or the information contained herein.
- When disposing this product, please comply with the municipal regulations and ordinances.
- Always attach the end cover while power is active.
FCC PART15 Class A Notice
This equipment has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference when the equipment is operated in commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference at his own expense.
WARNING TO USER
Any changes or modifications not expressly approved by the party responsible for compliance could result in the user's
authority to operate the equipment.
