Contec CPS-PCS341EC-DS1-1201 страница 10 Скачать руководство пользователя

Страница: 10 / 44

1 Before Using the Product

CPS-PCS341EC-DS1-1201 Hardware Manual

Safety Precautions

Understand the following definitions and precautions to use the product safely.

Safety Information

This document provides safety information using the following symbols to prevent accidents resulting

in injury or death and the destruction of equipment and resources. Understand the meanings of these

labels to operate the equipment safely.

DANGER indicates an imminently hazardous situation which, if not avoided, will

result in death or serious injury.

WARNING indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

CAUTION indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury or in property damage.

Handling Precautions

- Do not use the product in locations exposed to a flammable or corrosive gas. It may cause explosion,

fire, electrical shock, or malfunction.

- Do not allow this device to come into contact with foreign substances (metal particles, flammable

substances, liquids, etc.) This can cause fire or electrical shock.

- Do not place this device in an unstable location or use incomplete mountings. This may cause the

device to fall.

- Be sure to connect the product to the stipulated power supply voltage. Connecting to a different

voltage might cause a fire or electrical shock.

- This product is not intended for use in aerospace, space, nuclear power, medical equipment, or other

applications that require a very high level of reliability. Do not use the product in such applications.

- If using this product in applications where safety is critical such as in railways, automotive, or disaster

prevention or security systems, please contact your retailer.

- Do not use or store this product in a location exposed to high or low temperature that exceeds range

of specification or susceptible to rapid temperature changes.

e.g. - Exposure to direct sun

- In the vicinity of a heat source

- Do not use this product in extremely humid or dusty locations. It is extremely dangerous to use this

product with its interior penetrated by water or any other fluid or conductive dust. If this product
must be used in such an environment, install it on a dust-proof control panel, for example.

- Do not use this product in the vicinity of devices that generate strong magnetic force or noise. Such

products will cause this product to malfunction.

- Do not use or store this product in the presence of chemicals.

- CONTEC reserves the right to refuse to service a product modified by the user.

- In the event of failure or abnormality (foul smells or excessive heat generation), unplug the power

DANGER

WARNING

CAUTION

DANGER

CAUTION

Содержание CPS-PCS341EC-DS1-1201













































Результаты поиска

Содержание CPS-PCS341EC-DS1-1201

Отзывы:

Похожие инструкции для CPS-PCS341EC-DS1-1201

Бренды по названию

Популярные бренды

Contec CPS-PCS341EC-DS1-1201, Руководство по оборудованию

Результаты поиска

Содержание CPS-PCS341EC-DS1-1201

Отзывы:

Похожие инструкции для CPS-PCS341EC-DS1-1201

Бренды по названию

Популярные бренды