Figure 3.6 Alarm Setup
Revolving the knob key to setup alarm function. The Corresponding function and the adjustable
ranges are showed in the table3.2:
Table 3.2 The alarm setup function and adjustable ranges
No
Function
Adjustable Range
1
FHR ALM(FHR Alarm)
Optional: Turn on, shut off The default situation
is alarm on.
2
ALM HIGH(FHR Upper Limit of
Alarm)
Optional: lower limit of alarm-310, the unit is
BPM, and the default is 190
3
ALM LOW(FHR Lower Limit of
Alarm)
Optional: high limit of alarm 0④FHR, the unit is
BPM, and the default is 110
4
ALM DELAY(FHR Alarm Delay)
Optional:0④60,the unit is second, and the default
is 30 seconds
Note:
1
When FHR is in alarm situation, alarm indicator becomes red
2
When FHR exceeds the alarm limit and time exceed the set alarm delay time
continuously, alarm will occur and an alarm symbol will appear on the screen.
（2（Patient Setup
Revolving the knob key to enter patient setup, the diagram is showed as Figure 3.7:
Figure 3.7 Patient Setup
Revolving the knob key to setup patient function. The Corresponding function and the adjustable
ranges are showed in the table3.3:
Table 3.3 the patient setup function and adjustable ranges
No
Function
Adjustable Ranges
1
NAME(Name)
Optional: 12 letter or numeral. The default is blank
2
AGE(Age)
Optional: numeral from 1-100. The default is 25
3
BED NO.(Bed No.)
Optional: numeral from 1-100. The default is 1
4
PAT NO.(Case History No.)
Optional: 12 letter or numeral. The default is blank
