
Introduction
Getting Ready
Taking Pictures
Playback
Set Up
EN-171
NEXT
BACK
Contents
Glossary
Index
Nomenclature
Menus and Settings
Troubleshooting
3
Press the 4-way button up or down to
select [SINGLE] or [MULTI], then press
the OK button
E
.
4
Press the 4-way button left to select the
CONTAX logo screen, then press the OK
button
E
.
The CONTAX logo screen is configured, and an example of the startup
screen is displayed for 1 second before returning to the SET UP menu
screen.
To set a user-defined screen (SINGLE)
1
Turn the camera on and press the mode
button until "
G
" lights up on the mode
select LED.
The SET UP menu screen is displayed.
2
Press the 4-way button up or down to
select [START SCREEN], then press right.
B
Note
This setting is retained when you turn the camera off.
A
Important
Check that the memory card containing the images you want to use is inserted into the
camera.
MULTI
SINGLE
OFF
SELECT START SCREEN
RESET
SELECT START SCREEN
SELECT IMAGE
OK
BEEP
SHUTTER VOL
START SCREEN
REC REVIEW
+2
+2
SET
2SEC
ENGLISH
VIDEO OUT
NTSC
SET UP(2/3)
LANGUAGE