14
Staff Speaker & Microphone Installation
Option 1:
STS-SU1 Staff Unit
1. Place the staff unit on the staff side of the countertop, ensuring that it
does not cause an obstruction and is as close to staff as possible.
2. Use the cable management hole in the counter to run the staff
microphone cable back to the amplifier.
If there is not already a cable management hole, drill one (or at least a ½
inch hole) in a suitable location near the rear of the counter.
3. Plug the unit’s connectors with BLACK and YELLOW wires into the “Staff
Spkr” port on the back of the amplifier.
Note
: The BLACK wire should be
on the LEFT side of the connector. The YELLOW wire should be on the
RIGHT side of the connector.
4. Plug the unit’s connectors with BLACK+WHITE and RED wires into the
“Staff Mic” port on the back of the amplifier.
Note
: The BLACK+WHITE
wires should be on the LEFT side of the connector. The RED wire should
be on the RIGHT side of the connector.