Constructor CTSC90-406VS, Оригинальное руководство пользователя

Страница: 52 / 60

Attention: When working with
the flexible shaft, cover the saw
blade with the blade guard.
Foot Switch
(Not available on CTSC90-406VS)
The machine can be operated in
continuous operation or with the additional
foot switch. The switch is used to select
between the operating modes. The operating
mode should always be selected when the
machine is switched off. The machine is in the
foot switch mode when the switch is at the
"0" position. The machine is in the continuous
mode when the switch is at the “I" position.
With the continuously variable electronic
speed control, the cutting speed can be
increased by turning to the right or reduced by
turning to the left.
MAINTENANCE
Warning! In the interests of
operational safety, always switch off the saw
and remove the mains plug before carrying
out maintenance work.
General
Wipe chips and dust off the machine from
time to time using a cloth.
Re-application of the wax coating on the
workbench makes feeding the workpiece
to the blade easier.
The mains cable should be replaced
immediately if pulled out, cut or damaged
in any other way.
Do not lubricate the motor bearings or
internal parts!
Changing the Saw Blade with pins
Switch off the saw and remove the
mains supply plug before installing saw
blades in order to avoid injuries caused by
unintentional activation of the saw.
1. Saw blade removal. Extract the saw-
blade by unscrewing the Clamping screw.
Remove the saw-blade from the upper
and lower support by slightly pressing
the upper arm down.
2. Inserting the new saw-blade. Lead
one end of the saw-blade through the
perforation in the table and insert the
saw-blade pins into the notch. Repeat
this procedure at the upper blade
support. Before hooking it in.
Slightly press the upper arm down.
Check the position of the blade pins at
the supports.
Attention! The machine may start
due to unintentional actuation of the foot
switch in the foot switch mode. Attention!
Never leave the machine unattended while
it is switched on.