Constructor CTSC90-406VS, Оригинальное руководство пользователя

Страница: 49 / 60

OPERATION
Mounting the machine on a work bench
A workbench made from solid wood is
better than one made of plywood, as
interfering vibrations and noise are more
noticeable with plywood.
The necessary tools and small parts
for assembling the saw on a
workbench are not supplied with the
saw. However, use equipment of at least
the following:
1. Machine
2. Bolt M8 (×3)
3. Flat Washer Ø8 (×3)
4. Rubber Pad
5. Work Table
6. Big Flat Washer Ø8 (×3)
7. Lock Washer Ø8 (×3)
8. Nut M8 (×3)
First of all, drill holes into the seating
surface and then Insert the screws.
A foam rubber base for reduction of
noise is not supplied with the saw
either. However, we expressly
recommend that you use such a base
to keep vibration and noise to a
minimum. Ideal size 400 × 240 mm.
Setting the Saw Bench
• Release the star button and bring
the saw bench to a right angle in
relation to the saw blade. Use a 90°
angle L-square measure the right
angle between the blade and the
bench. The saw blade be at 90° to the
angle.
• Close the star button when the
distance between the blade and the
90° angle is at a minimum. The bench
should then be at 90°
to the saw blade.
Setting the angle scale
Release the lock screw and bring the
indicator to the zero position. Fasten the
screw.
Please note: the angle scale is a useful piece of
supplementary equipment, but should not be
used for precision work. Use scrap wood for
saw tests, adjust the bench if necessary.