Constructor CTSC90-406VS, Оригинальное руководство пользователя

Страница: 45 / 60

alll parts must be correctly mounted and
all conditions must be fulfilled to ensure
faultfree operation of the electric tool.
The moving protective hood may not be
fixed in the open position. Damaged
protective devices and parts must be
properly repaired or replaced by a
recognised workshop, insofar as nothing
different is specified in the operating
manual.
Damaged switches must be replaced at
a customer service workshop. Do not use
any faulty or damaged connection cables.
Do not use any electric tool on which the
switch can not be switched on and off.
Additional Safety Rules for Scroll Saws
• This scroll saw is intended for use in
dry conditions, and for indoor use only.
• Do not cut pieces of material too small to
hold by hand outside the blade guard.
• Avoid awkward hand positions where a
sudden slip could cause a hand to move into
the blade.
• Always use the blade guard to avoid
possible injury due to blade breakage.
• Never leave the scroll saw work area
with the power, or before the machine has
come to a complete stop.
• Do not perform layout, assembly or set up
work on the table while the cutting tool is in
operation.
• Never turn your scroll saw on before
clearing the table of all objects: (tools,
scraps of wood, etc) except for the
workpiece and related feed or support
devices for the operation planned.
Maintenance and Repair
Pull out the mains plug for any adjustment or
repair tasks.
The generation of noise is influenced by
various factors, including the characteristics of
saw blades, condition of saw blade and
electric tool. Use saw blades which were
designed for reduced noise development,
insofar as possible. Maintain the electric
tool and tool attachments regularly and if
necessary, initiate repairs in order to reduce
noise.
Report faults on the electric tool, protective
devices or the tool attachment to the person
responsible for safety as soon as they are
discovered.
Check the electric tool for potential damage.
Protective devices and other parts must be
care-fully inspected to ensure that they are
fault-free and function as intended prior to
continued use of the electric tool. Check
whether the moving parts function faultlessly
and do not jam or whether parts are
damaged. All parts must be correctly mounted
and all conditions must be fulfilled to ensure
faultfree operation of the electric tool. The
moving protective hood may not be fixed in
the open position. Damaged protective
devices and parts must be properly repaired
or replaced by a recognized workshop, insofar
as nothing different is specified in the
operating manual.
Damaged switches must be replaced at a
customer service workshop. Do not use any
faulty or damaged connection cables. Do
not use any electric tool on which the switch
cannot be switched on and off.