Installation tutorial for Console Customs Xbox 360
MaxFire – FUSION rapid fire Mod Chip.
This tutorial is designed to aid you in installation of a console customs MaxFire LITE modchip. This tutorial covers the installation of
our new 14-pin chip . This chip only works with “common Ground” style wireless controllers. The first part of this tutorial shows
how to find if your controller is a common ground style. This chip will not work with matrix style controllers.
This installation requires soldering several wires to extremely small confined spaces. We do not advise attempting this installation if
you are a beginner at soldering. We recommend reading through all of the instructions and understand them before beginning
your installation.
WARNING: Please proceed with this installation at your own risk. We will not be held responsible for any damage to
yourself, your controller, your Xbox 360 console or any other equipment.
This tutorial requires opening your controller which will void the warranty of your controller.
Tools needed:
•
Torx T8 Security/tamper proof driver (For opening wireless controller)
•
Soldering iron (A 5w/30w from radio shack is about $12)
•
Solder (We use rosin core solder from radio shack so there is no need for flux $4)
•
Wire strippers (that can strip 30ga wire, a 30ga wire wrap tool from radio shack includes a 30ga stripper $8)
•
Wire cutters
•
Hot glue gun
•
9/64
th
drill bit (or close to it a 1/8
th
will also work)
•
Small pocket knife or razor blade (optional but helpful)
Please visit our website at
www.consolecustoms.com
