Consew 104-1T, Каталог запасных частей и инструкция по эксплуатации

Страница: 11 / 38

TO REGULATE THE PRESSURE ON THE PRESSER FOOT
The pressure on the presser foot is regulated by the thumb screw C, Fig.
3. To increase the pressure, turn t he thumb screw over to the right or
downward. To decrease the pressure, turn the thumb screw over to the lef t
or upward.
TENSIONS
If stitches are too tight, raise needle holder approximately 1/16 inch.
Various effects can be produced by changing the height of the needl e
holder as well as by adjusting the length of stitch.
The tension on the threa d is regulated by the thum b nut B, Fig. 4 at the
left of the tension discs. T o increase the tension turn this nut over toward
you. To decrease the tension turn this thumb nut over from you. This tension
should be only tight enough to prevent the skipping of stitches.
10
Downloaded
from
www.aberdeensewing.com