Consew 104-1T, Каталог запасных частей и инструкция по эксплуатации

Страница: 14 / 38

TO SET THE LOOPER
Turn the machine back on it s hinges and turn handl e K, fig. 10 and wing
screw B, Fig. 3 to the front. Loosen set screw X, Fig. 10 of the operating
worm gear Y, and turn the gear slightly , until the notch in the looper is in its
correct position as instructed above. Af ter having set the worm gear flush
with the end of the looper shaft M, tighten the set screw X.
Fig. 10, Oiling points and adjustments in base of machine
13
Downloaded
from
www.aberdeensewing.com