5
The Audio Video Sender (UC-AV10) is a solution for distributing audio and
video signals to every place in the house without the need of wires. The AV
Sender gives you the possibility to view any video source (satellite receiver,
video recorder, camcorder, DVD player, digital or analogue Set-Top Box or
Pay-TV decoder box) on your second TV in your home.
The TOTAL CONTROL AV Sender (UC-AV10) package contains:
-
TRANSMITTER unit
-
RECEIVER unit
-
Infra-red (IR) Eye
-
Two Power adapters
-
Two “AV” cables
The TRANSMITTER sends the audio and video signals from the source
device (VCR, DVD, SATELLITE/ CABLE BOX, CAMCORDER, etc) by 2.4 GHz to
the RECEIVER that is connected to the destination device. The built in
Remote Control Extender sends the IR signal in the opposite direction
(from RECEIVER unit to TRANSMITTER unit) at a frequency of 433.92 MHz.
TRANSMITTER unit
The TRANSMITTER operates on 9 Volts DC 300mA that is supplied by the
AC/DC Adapter (included in package). Connecting from the audio or video
device to the TRANSMITTER is done by the included AV cable labelled
"transmitter"). The Audio and/or video signals are transformed to a 2.4GHz
frequency that will be sent via the built-in antenna.
Furthermore the TRANSMITTER transforms the Remote Control Extender
signal (at 433.92 MHz) back to an IR command.
RECEIVER unit
The RECEIVER operates on 9 Volts DC 300mA that is supplied by the AC/DC
Adapter (included in package). Connecting from the audio or video device
to the RECEIVER is done by the included AV cable "Receiver". The high
frequency signal (2.4GHz) received by this unit are captured by
the built-in antenna of the RECEIVER unit and will be transformed into the
original audio and video signals.
Secondly the RECEIVER has a built in remote control extender. When an
infra red signal is Received by the RECEIVER, it will transform the IR
command to 433.92 MHz and can be sent through walls and ceilings.
Please note that this feature is only accessable for devices that are
controlled via IR (infra-red) signals at a frequency of 30 - 60 kHz
This feature does not support the 2-way IRDA waveform. If you are unsure
of the details of the remote control (IR) output, please refer to the manual
of the original device or contact your cable supplier.
The Product
OFA_TOTAL_CONTROL_AV_Sender 14-07-2005 15:27 Pagina 5
