Make outgoing call (without voice dialling)
To make an outgoing call, dial as usually and lead in the connection
on your mobile phone. Then proceed as described under „Call
delivery“ to make a call via the Headset BT 20S.
Make outgoing calls
(mobile phones with voice dialling)
This function is only available with mobile phones that offer voice
dialling.
Observe the operating instructions for your mobile phone.
For this, press shortly the On/Off key (3). You hear a signal tone.
Now speak the wanted name. If your mobile phone recognition is
successful your connection is established and you are able to speak
via the headset to your interlocutor.
Please try again if your mobile phone’s recognition fails. You may
have to check the configuration of your mobile phone.
For this, observe the operating instructions for your mobile
phone
Redialling/Call last telephone number again
It is possible with most mobile phones to redial the number you
called lastly. For this, keep the button „Volume - „(6) pressed for
approx. 2 seconds until you hear several signal tones. The number
you called lastly will be dialled again.
Observe the operating instructions for your mobile phone
26
Éléments de connexion et de commande
Mise en service
Chargement de l’accumulateur intégré / indication
d’état de charge
ble. Avant la première utilisation, vous devez charger ce dernier
avec le chargeur fourni pendant env. 12 heures.
Pour cela, branchez la fiche du chargeur dans la douille de charge-
ment (2) du Kit Piéton et la fiche secteur du chargeur dans une prise
secteur ordinaire de 230 V/50 Hz.
35
(1) Oreillette
(2) Douille de chargement
(3) Marche/Arrêt/Décrocher
(4)
(5) Témoin lumineux
(6) Volume -
Le Kit Piéton est équipé d’un accumulateur Ni-MH rechargea-
