40
9.1 Installing the SATA Hard Drive
☞
A SATA hard drive is not included in the delivery. It must be purchased separately.
Fig. A
A SATA hard drive with a maximum capacity of 500 GB can be installed within the housing of the 4 Chan-
nel Digital Recorder.
To ensure correct installation, it is necessary to remove the cover of the 4 Channel Digital Recorder. The
cover of the 4 Channel Digital Recorder is secured with 7 housing screws (2 screws are attached to each
side and 3 are on the back of the device).
•
Ensure that the 4 Channel Digital Recorder is unplugged from the power supply and the device is
switched off.
•
Remove the 7 housing screws from the cover.
•
Carefully take off the cover.
•
Attach both the SATA connector and the power connector to your SATA hard drive.
•
Place the SATA hard drive into the intended mounting slot as shown in Fig. A.
•
Fasten the SATA hard drive into the slot with suitable screws.
•
Replace the cover onto the 4 Channel Digital Recorder and reattach the screws you removed previ-
ously.
Содержание 75 15 91
Страница 117: ...116 ...
Страница 118: ...117 ...