Conrad 75 13 76, Руководство по эксплуатации

Страница: 8 / 17

14 15
Operation 6.
Find a suitable place for mounting from which the desired object can be observed. A suitable place for mounting has the following features:
Dry. •
As free from dust as possible. •
Little vibration. •
Good air circulation. •
There is a mains socket in the proximity. •
Fastening the wall bracket 6.1.
Before drilling or fastening screws make sure that there are no electric cables, pipes, or wires running through concrete or masonry that could
be damaged.
Use supplied screws to attach wall bracket to wall or suitable platform. 1.
Use dowels if relevant.
Align the camera and screw the T - bolt tight. 2.
Do not point the camera directly toward a source of bright sunlight, as this could lead to over-exposure and an unclear picture.
Usage 6.2.
Reconnect the system as described under point 5 “Test” and operate to start surveillance.
Troubleshooting 7.
With this product, you purchased a reliable product which is designed using current state-of-the-art technology. Nevertheless, problems or failures might occur. In the
following, you will get information on how you can eliminate possible faults.
Strictly observe the safety instructions.
Error Possible cause
No image
Camera is not supplied with electricity. •
Check all cable connections. •
The image is distorted
The range of the system was exceeded. Shorten the distance. •
The supply voltage is too low. •
Flickering/running/B/W image Strong spotlight in the cover range of the camera. •
All repairs other than the ones described above must be carried out by authorized specialists (electricians) only.
Maintenance and cleaning 8.
The devices need no maintenance other than being cleaned occasionally. For this reason, you should never open them. If you do open the devices, the warranty will be
rendered invalid. The outside of the devices should be cleaned with a clean, slightly damp cloth or brush only. Do not use cleaning agents which contain carbon, petrol,
alcohol or similar substances for cleaning purposes. Otherwise the appliance covering could corrode. Moreover, the vapours are detrimental to health and are explosive.
Nor should sharp-edged tools such as screwdrivers or metal brushes be used for cleaning purposes.
Disposal 9.
Dispose of waste electrical and electronic equipment 9.1.
In order to preserve, protect and improve the quality of environment, protect human health and utilise natural resources prudently and rationally, the user
should return unserviceable product to relevant facilities in accordance with statutory regulations.
The crossed-out wheeled bin indicates the product needs to be disposed separately and not as municipal waste.
Technical data 10.
Camera
Operating voltage 12V DC
Current consumption 0,22 W (max.)
Picture sensor 1/4CCD colour
Picture element 510 x 490 (NTSC) 628 x 582 (PAL)
Resolution 330 TV lines (horizontal)
Video output 1 vp-p / 75 Ohm
Lens 3.6 mm
Sensitivity 2~20 Lux (with infrared LED)
IR lighting 11 x 1 CDS
S/N ratio >48 dB
Dimensions (L x W x H) 128 x 72 x 60 mm
Power adaptor
Operating voltage 230V~ 50Hz
Output voltage 12 V DC / 600 mA