12
In the door/window detector itself, the
cables are fed under the battery com-
partment for the LR44 button cells to
the screw terminal strips (otherwise the
LR44 button cells cannot be inserted
properly), see figure 5.
KL1:
The connection for external NO con-
tacts is always active, irrespective as
to whether ‘disarmed’, ‘internally armed’
or ‘externally armed’ is set; the alarm
base station sets off an alarm imme-
diately upon a connection between the
two screw terminals!
KL2:
For external NC contacts (if using KL2,
the jumper in the terminal must be re-
moved!)
• Attach the door/window detector using
the enclosed double-sided tape.
Alternatively you can attach it with a
screw through the opening ‘
B
’, see fig-
ure 4 on page 11. This also prevents it
from being easily removed from the wall
(sabotage protection).
The screw is also indicated in figure 5
to the right.
Figure 5
When drilling or fastening screws be careful not to acciden-
tally damage any power supply lines, gas or water pipes as
this could pose a life-threatening danger!
• Do not insert the batteries yet. The casing should initially remain open.
TA1
KL2
KL1
D1
NO-Kontakt
NC-Kontakt
-
+
+
+
-
-
+
-
+ -
NC contacts
NO contacts
