17
• Return to the alarm base station. The LCD’s dis-
play has changed. See the figure on the right. The
number ‘
3
3
3
3
3
’ is the continuous sensor number (and
not ‘the third door/window detector’). The appro-
priate number is displayed, depending on the
number of sensors you already have registered
with the alarm base station.
• Use the buttons on the alarm base station to enter
the name of the sensor, for example, ‘
livingr
livingr
livingr
livingr
livingr
W1
W1
W1
W1
W1
’ for ‘living room, window 1’.
f
To enter the letters use the 2-9 buttons, each
of which represents several letters (click
through as with a mobile phone by repeat-
edly and quickly pressing the same button).
f
Numbers and umlauts can also be found on
the buttons.
f
Use the ‘
0
’ button to enter a space character.
f
Special characters can be entered using the
‘
y
’ and ‘
z
’ buttons.
f
You can use the ‘
Menü a/A
’ button to switch
between lower and upper case.
f
The cursor automatically jumps to the next
position approx. one second after the last
button was pressed.
f
You can use the ‘
w
C
’ button to delete a
character you entered incorrectly by mis-
take.
• Once you have entered the name you require,
press the ‘
OK
’ button. The LCD has the display
shown on the right.
contact 3
_
contact 3
livingr W1
close : N
intern: N
