86
k) Display Area „OUT HUMIDITY“ (outdoor humidity)
The following setting and subfunctions are available:
• Setting and Activating/Deactivating Upper Humidity Alarm
• Setting and Activating/Deactivating Lower Humidity Alarm
• Displaying/Resetting Maximum Value Storage for Outdoor Humidity
• Displaying/Resetting Minimum Value Storage for Outdoor Humidity
Touch the display area „OUT HUMIDITY“ briefly repeatedly until the desired subfunction flashes.
Setting and Activating/Deactivating Upper Indoor Humidity Alarm
• Touch the display area „OUT HUMIDITY“ repeatedly until the outdoor humidity and the display „HI AL“ flashes.
• Select the upper threshold of the outdoor humidity with the buttons „+“ and „-“. Keep the respective button pressed
for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears below the display „HI AL“. When the threshold value set is
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location.
To get to the next subfunction (setting and activating/deactivating the lower humidity alarm) -> touch the
display area „OUT HUMIDITY“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Setting and Activating/Deactivating Lower Humidity Alarm
• Touch the display area „OUT HUMIDITY“ repeatedly until the outdoor humidity and the display „LO AL“ flashes.
• Select the lower threshold of the outdoor humidity with the buttons „+“ and „-“. Keep the respective button pressed
for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears above the display „LO AL“. When the threshold value set is
undercut, the weather station will emit an alarm. It is deactivated by touching the display in any location.
To get to the next subfunction (displaying/resetting the maximum value storage for outdoor humidity) ->
touch the display area „OUT HUMIDITY“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)