75
Setting and Activating/Deactivating Upper Barometric Pressure Alarm
• Touch the display area „PRESSURE“ repeatedly until the barometric pressure value and the display „HI AL“ flashes.
• Select the barometric pressure with the buttons „+“ and „-“. Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears below the display „HI AL“. When the threshold value set is
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„HI AL“ and the icon „
“ continue to flash, however, until the measured value drops below the threshold value set.
To get to the next subfunction (setting and activating/deactivating the lower barometric pressure alarm) ->
touch the display area „PRESSURE“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Setting and Activating/Deactivating Lower Barometric Pressure Alarm
• Touch the display area „PRESSURE“ repeatedly until the barometric pressure value and the display „LO AL“ flashes.
• Select the barometric pressure with the buttons „+“ and „-“. Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears above the display „LO AL“. When the threshold value set is
undercut, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„LO AL“ and the icon „
“ continue to flash, however, until the measured value rises above the threshold value set.
To get to the next subfunction (displaying/resetting the maximum value storage for barometric pressure) -
> touch the display area „PRESSURE“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Displaying/Resetting Maximum Value Storage for Barometric Pressure
• Touch the display area „PRESSURE“ repeatedly until the maximum barometric pressure and the display „MAX“ (to
the left of the weather symbols) flash.
• To reset the maximum value storage, keep the display area „PRESSURE“ pushed for 3 seconds. The new maximum
is the currently measured barometric pressure until it changes.
To get to the next subfunction (displaying/resetting the minimum value storage for barometric pressure) ->
touch the display area „PRESSURE“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)