81
i) Display Area „IN HUMIDITY“ (indoor humidity)
The following setting and subfunctions are available:
• Setting and Activating/Deactivating Upper Humidity Alarm
• Setting and Activating/Deactivating Lower Humidity Alarm
• Displaying/Resetting Maximum Value Storage for Indoor Humidity
• Displaying/Resetting Minimum Value Storage for Indoor Humidity
Touch the display area „IN HUMIDITY“ briefly repeatedly until the desired subfunction flashes.
Setting and Activating/Deactivating Upper Indoor Humidity Alarm
• Touch the display area „IN HUMIDITY“ repeatedly until the indoor humidity and the display „HI AL“ flashes.
• Select the upper threshold of the indoor humidity with the buttons „+“ and „-“. Keep the respective button pressed for
quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears below the display „HI AL“. When the threshold value set is
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„HI AL“ and the icon „
“ continue to flash, however, until the measured value drops below the threshold value set.
To get to the next subfunction (setting and activating/deactivating the lower humidity alarm) -> touch the
display area „IN HUMIDITY“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Setting and Activating/Deactivating Lower Humidity Alarm
• Touch the display area „IN HUMIDITY“ repeatedly until the indoor humidity and the display „LO AL“ flashes.
• Select the lower threshold of the indoor humidity with the buttons „+“ and „-“. Keep the respective button pressed for
quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears above the display „LO AL“. When the threshold value set is
undercut, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„LO AL“ and the icon „
“ continue to flash, however, until the measured value rises above the threshold value set.
To get to the next subfunction (displaying/resetting the maximum value storage for indoor humidity) ->
touch the display area „IN HUMIDITY“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)