84
Setting and Activating/Deactivating Upper Temperature Alarm
The alarm/threshold se there only applies for the temperature display set initially (measured temperature
= „TEMP“, wind chill temperature = „WINDCHILL“ or dew point temperature = „DEW POINT“). An alarm
can be set for each of the 3 temperature displays.
• Touch the display area „OUT TEMP“ repeatedly until the outdoor temperature and the display „HI AL“ flashes.
• Select the upper threshold with the buttons „+“ and „-“. Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears below the display „HI AL“. When the threshold value set is
exceeded, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„HI AL“ and the icon „
“ continue to flash, however, until the measured value drops below the threshold value set.
To get to the next subfunction (setting and activating/deactivating the lower temperature alarm) -> touch
the display area „OUT TEMP“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)
Setting and Activating/Deactivating Lower Temperature Alarm
The alarm/threshold se there only applies for the temperature display set initially (measured temperature
= „TEMP“, wind chill temperature = „WINDCHILL“ or dew point temperature = „DEW POINT“). An alarm
can be set for each of the 3 temperature display.
• Touch the display area „OUT TEMP“ repeatedly until the outdoor temperature and the display „LO AL“ flashes.
• Select the lower threshold with the buttons „+“ and „-“. Keep the respective button pressed for quick adjustment.
• Use the button „ON/OFF“ to switch the alarm function on or off.
With the alarm function on, the icon „
“ appears above the display „LO AL“. When the threshold value set is
undercut, the weather station will emit an alarm. It is deactivated by touching the display in any location. The display
„LO AL“ and the icon „
“ continue to flash, however, until the measured value rises above the threshold value set.
To get to the next subfunction (displaying/resetting the maximum value storage) -> touch the display area
„OUT TEMP“ briefly
Leaving setting mode -> touch another display area (or wait for 30 seconds without touching the touch
screen)