The motion detector is only permitted for indoor use.
Screw terminals are located on the back. First connect the radar sensor with the avail-
able leads. (See connecting elements of the respective type) The stripped end of the
conductor may on no account be longer than 5 mm. Then release using a small
screwdriver the cover of the device and place the radar sensor in the flush-type box.
Tighten the screws for the claw mount left and right.
Alarm operation:
If the plug-in jumper is inserted on the jumper, then the light/dark recognition is
deactivated. The sensor is always active, irrespective of the ambient light.
Normal operation:
The plug-in jumper shall not be implemented for normal operation. Light/dark
recognition is then active.
Make the adjustments at the potentiometers, and place the cover back on the sensor.
23
Radar motion detector
