CONQUEST PB120LPG, Руководство оператора

Страница: 26 / 442

-
8

Switch on the blower.
 With surface cleaning:
Roller brush and side brush control le-
ver (1) backwards: Switches the roller
brush on.
Roller brush control lever (3) back-
wards: Lowers the roller brush.

Control lever container flap (4) to the
front: Container flap opens.
 With cleaning of side edges:
Roller brush and side brush control le-
ver (1) forwards: Switches the roller
brush on, switches the side brushes on
and lowers them.
Roller brush control lever (3) back-
wards: Lowers the roller brush.

Switch off the blower.
 With surface cleaning:
Roller brush and side brush control le-
ver (1) backwards: Switches the roller
brush on.
Roller brush control lever (3) back-
wards: Lowers the roller brush.

Control lever container flap (4) to the
front: Container flap opens.
 With cleaning of side edges:
Roller brush and side brush control le-
ver (1) forwards: Switches the roller
brush on, switches the side brushes on
and lowers them.
Roller brush control lever (3) back-
wards: Lowers the roller brush.
 DANGER
Risk of injury!
 During the emptying process, persons
and animals must not stay within the
swivelling range of the waste container.
Danger of tipping!
 Place the device on an even surface
during the emptying process.
몇 WARNING
Risk of crushing!
 Never reach into the rod assembly for
the drainage mechanism. Do not stay
under the raised container.
ATTENTION
Risk of personal injury or damage!
 Material of the rotating roller brush may
be catapulted off during the emptying
process. Keep an appropriate distance.

Raise the roller brush and side brushes
using the control levers: Control lever 1
to middle position and control lever 3
forwards.

Close the container flap, in order to do
so, move the control lever (4) to the
back:

Raise the container flap, in order to do
so, move the waste container control le-
ver (2) to the back:

Slowly drive towards the collection con-
tainer.

Lock parking brake.

Open the container flap, in order to do
so, push the container flap operating le-
ver (4) to the front and empty the waste
container.

Close the container flap, in order to do
so, push the container flap operating le-
ver (4) to the back until it is tipped in-
wards in the end position.

Release parking brake.

Drive away the collection container
slowly.

Lower the waste container into the end
position, in order to do so, move the
waste container control lever (2) to the
front

Raise the roller brush and side brushes
using the control levers: Control lever 1
to middle position and control lever 3
forwards.

Close the container flap, in order to do
so, move the control lever (4) to the
back:

Pull the motor speed adjustment all the
way to the back.

Press brake pedal and keep it de-
pressed.

Lock parking brake.

Turn ignition key to "0" and remove it.

DANGER
Transport damage!
 Observe the net weight (transport
weight) of the device during transport
on trailers or vehicles.
 When transporting in vehicles, secure
the appliance according to the guide-
lines from slipping and tipping over.

Turn ignition key to "0" and remove it.

Close gas drawing valve by turning it in
clock-wise direction.

Lock parking brake.

Secure the appliance at the lashing
points (4x) using tension belts, ropes or
chains.

Secure the wheels of the machine with
wheel chocks.

DANGER
Risk of injury and damage! Note the weight
of the appliance in case of storage.

Park the sweeper on a level surface in
a dry, frost protected area. Protect it
against dust by means of covering ma-
terial.

Raise the roller brush and the side-
brushes to prevent the bristles from be-
ing damaged.

Close the container flap.

Turn ignition key to "0" and remove it.

Close gas drawing valve by turning it in
clock-wise direction.
Unscrew the gas hose with union nut
(use 30 mm spanner).
Lock the gas bottle with the safety cap
and store upright in a suitable storage
area (also see Chapter "Safety instruc-
tions).

Lock parking brake.

Lock the sweeper to ensure that it does
not roll off.
Additionally observe the following points if
the sweeper is not used over a longer peri-
od of time:

Change engine oil.

Drain off the cooling water if frost is ex-
pected and check whether there is ade-
quate anti-frosting agent.

Clean the inside and outside of the
sweeper.

Disconnect battery.

Charge battery and recharge it approx.
every 2 months.
Sweeping dry floors
Sweeping damp or wet floors
Emptying waste container
Turn off the appliance
Transport
Storage/decommissioning
26 EN