23
WORK
6.
Via the "man present" lever (6), the brushes begin to rotate and the squeegee begins to suck in.
7.
During the first metres, check there is sufficient solution and that the squeegee dries perfectly.
6
2. PREPARATION FOR WORK (SYSTEM E)
1.
Plug the machine's power supply plug into the mains power supply, the power present light (1)
will light immediately
ATTENTION: before using the machine, the operators must be suitable trained.
We therefore suggest you read this instruction booklet carefully and read it again
whenever difficulties arise while using the machine
2.
Press the suction motor switch (2)
3.
Press the solenoid valve switch (3), if present on the machine (optional)
4.
Open the water tap with lever (4) on the back of the machine, the water automatically falls
during the rotation of the brushes.
5.
Lower the squeegee using lever (5) on the back of the machine.
ATTENTION: If the solution tap is left open after using the machine the solution
will continue being emitted, this problem does not exist for versions with
solenoid valve
5
4
ATTENTION: if the machine is used in places where there is a risk of falling
objects, the operator must be provided with all the appropriate protection devices
as laid out in the legal requirements
1
3
2