15
MACHINE PREPARATION
12.
HOUR COUNTER INDICATOR (OPTIONAL SYSTEM B)
The
machine does not have a built-in hour counter, an optional kit is subsequently assembled.
The hour counter indicates the total operating time, the line that appears indicates the hours and
minutes of operation. The flashing “:” symbol indicates that the hour-counter is counting the machine
functioning time.
13.
SOLENOID VALVE CONTROL SWITCH (OPTIONAL SYSTEM E)
The
machine does not have a built-in solenoid valve, an optional kit is subsequently
assembled. The switch (1) is used to provide power to the solenoid valve, which emits the solution
onto the brushes only when consent is given by the man present switch.
14. INSTRUMENT PANEL COMPONENTS
The instrument panel components are identified as follows:
1.
Brushes operation lever (man present switch)
2.
Switch with green light, used to control the suction motor.
3.
Battery level display (version B), green light signal (version E) used to identify that the system is
live
4.
Switch with green light (version B), is used to control the brushes motor, hole plug (version E).
Solenoid valve control switch (optional version E)
15. REAR COMPONENTS
The rear components are identified as follows:
5.
Tap control stem
6.
Squeegee lifting lever
7.
Brush lifting pedal
8.
Discharge pipe with recovery tank cap
9.
Thermal circuit breaker (system E)
10.
Solution tank discharge cap – solution filter
1
4
3
2
5
6
7
8
1
9
10