12
MACHINE PREPARATION
ATTENTION: you are advised to use airtight batteries only, to avoid the
leakage of acids!
ATTENTION: you are advised to have the electric connections made by a
qualified, FIMAP trained technician
WARNING: you are advised to always wear protective gloves in order to avoid
the risk of serious injury to your hands
WARNING: You are advised to only lift and move the batteries with lifting and
transportation means suitable for the specific weight and size
8.
BATTERY CHARGER (FOR SYSTEM B ONLY)
In order not to cause permanent damage to the batteries it is essential to avoid their complete
discharge: arrange the recharge within a few minutes of the switching on of the flashing "discharged
batteries" signal.
NOTES: never leave the batteries completely discharged, even if the machine
is not being used. While recharging, keep the recovery tank raised, supporting
it with the cable, as shown in the figure. Check the battery charger is suitable
for the batteries installed, in terms of both capacity and type.
Check the battery charger is suitable for the batteries installed, in terms of both capacity and type
(lead/acid or GEL and equivalents).
ATTENTION: never charge a GEL battery with an unsuitable battery charger.
Follow the instructions given by the battery/battery charger manufacturer with
the utmost attention.
Beneath the recovery tank cover there is the battery connector (2), in which the battery charger
connector must be inserted. The coupling connector of the battery charger is consigned inside the bag
containing this instruction booklet, and must be assembled on the cables of the battery charger as
indicated in the instructions.
WARNING! This process must be carried out by qualified personnel. The
incorrect or imperfect connection of the cables to the connector can cause
serious harm to people and damage to objects.
2