• Remove the batteries if the machine needs to be tilted in order to perform maintenance
procedures.
• Have the machine checked by an authorised technical assistance centre every year.
• When disposing of consumable materials, observe the laws and regulations in force. Once
the machine has reached the end of its service life, the materials contained within it must be
disposed of in an appropriate manner, keeping in mind that the machine itself has been built
using fully recyclable materials.
• Do not push or tow the machine without an operator on the seat who can control the
machine.
• Do not wash the machine with pressurised water or wet the machine near electrical
components.
•
All repairs must be carried out by qualified personnel.
• Do not physically change the design characteristics of the machine.
• Use spare parts supplied by FIMAP or by FIMAP service centres.
• Wear personal protective equipment as required and as suggested in the manual.
TRANSPORT
WARNING:
• Drain both tanks before transport.
• Bring both the squeegee and the brushes to a working position before securing the machine
to the transport vehicle.
• Use a ramp, a truck or a trailer that can support the weight of the machine and the operator.
• To place the machine on the transport vehicle use a pulley. Do not drive the machine on or
off a truck or trailer.
• The ramp for placing the machine on the transport vehicle should have such a slope that the
machine does not get damaged.
• Engage the parking brake after loading the machine onto the transport vehicle.
• Secure the device according to the directives in force in the country of use, so that it cannot
slide or tip over when being transported.
ATTENTION:
• Use caution when moving the machine under temperatures below freezing. The water
contained in the water recovery tank or in the pipes could freeze, and could seriously
damage the machine itself.
10
