Connect Tech XDG004, Руководство пользователя

Страница: 20 / 31

Xtreme/GbE - Managed Carrier Ethernet Switch
Users Guide
www.connecttech.com
Document: CTIM-00429
Revision: 0.11
Page 20 of 31 Date: 2021-01-05
has properly powered its internal circuitry
On-board indicator LEDs (12-Port Models)
LED Function Details
D1 Gigabit Ethernet LED’s Rugged Positive Locking Header GbE LED (Operation
similar to RJ-45 Green LED)
D2 Gigabit Ethernet LED’s Rugged Positive Locking Header GbE LED (Operation
similar to RJ-45 Yellow LED)
D3 Xtreme/GbE Main Status
LED
Normal behavior = blinking every 1000ms
Programming = blinking every 100ms
Firmware Check Error = blinking every 100ms (with D2)
D4 Xtreme/GbE Error State
LED
Error State = blinking every 500ms
Fatal Error = LED stays ON permanently
Firmware Check Error = blinking every 100ms (with D1)
D5 TBD No Function at this time.
D8 IndVIN voltage is
ON
This is connected to the +VIN of the external input or the
+12V of the PC/104 or PCIe/104 bus connectors.
D9 Ind5V voltage is
ON
If ON this voltage has been successfully generated on
board the XDG
D10 Ind3.3V voltage is
ON
If ON this voltage has been successfully generated on
board the XDG
D11 PCIe UART Power Good If ON the PCIe UART (only available on PCIe/104 models)
has properly powered its internal circuitry