Xtreme/GbE - Managed Carrier Ethernet Switch
Users Guide
Document: CTIM-00429
Revision: 0.11
Page 19 of 31
Date: 2021-01-05
Standalone Power Requirements
Minimum Voltage
+9 VDC
Maximum Voltage
+36 VDC
Bus Mode Power Requirements
Bus Connector
Voltage Rail used
PC/104
+12V
PCIe/104
+12V
External Input Power Connector Details
Function
Main Input Power
+9V to +36V: All Models
Locations P16 (8-Port Models)
P7 (12-Port Models)
XDG
Connector
PN
1843790 - Manufacturer: Phoenix
Contact
Mating
Connector
PN
1847055 - Manufacturer: Phoenix
Contact
Pinout
Pin Signal
Description
1
+VIN
Power In
2
GND
Power Return
On-board indicator LEDs (8-Port Models)
LED
Function
Details
D1
Xtreme/GbE Main Status
LED
Normal behavior = blinking every 1000ms
Programming = blinking every 100ms
Firmware Check Error = blinking every 100ms (with D2)
D2
Xtreme/GbE Error State
LED
Error State = blinking every 500ms
Fatal Error = LED stays ON permanently
Firmware Check Error = blinking every 100ms (with D1)
D3
TBD
No Function at this time.
D6
IndVIN voltage is
ON
This is connected to the +VIN of the external input or the
+12V of the PC/104 or PCIe/104 bus connectors.
D7
Ind5V voltage is
ON
If ON this voltage has been successfully generated on
board the XDG
D8
Ind3.3V voltage is
ON
If ON this voltage has been successfully generated on
board the XDG
D9
PCIe UART Power Good
If ON the PCIe UART (only available on PCIe/104 models)