II-EVB-630W User Manual
Getting
Started
2.10.1 Dynamic IP Allocation
By default, the II-EVB-630W is configured to gain LAN access via a DHCP server.
Therefore, if a DHCP server is present, there is no need for additional configuration.
Default settings can be restored using the AT+iFD command, which you can issue in
the Dumb Terminal window. AT+iFD will revert all parameters to factory defaults.
1
Specific configuration for acquiring LAN settings via DHCP can be carried out
from the Quick Configuration window in the figure below:
2
Select the Use DHCP checkbox and click Save.
3
To activate these settings, recycle power to the II-EVB-630W.
Note: II-EVB-630W supports DHCP Server extensions. This means that if your
server’s assignees have additional LAN settings, such as an SMTP server, the
II-EVB-630W automatically configures and uses these settings.
Getting Started
20