II-EVB-630W User Manual
Firmware and Parameters Update
3.2
Managing Parameter Files
Parameters for the II-EVB-630W are stored in *.RPF files. Parameter files can be
used to save current configurations to be loaded for later use or to automate product
distribution.
3.2.1
Saving the II-EVB-630W Configuration to an RPF File
All or some of the parameters stored in the II-EVB-630W can be saved to a Remote
Parameters File (RPF), or loaded from an RPF file onto the II-EVB-630W, with or
without parameters configured on it.
To save the configuration to an RPF file:
1
Select the Full Configuration icon. The II-EVB-630W Full Configuration window
is displayed.
2
Click File >Save as RPF File in the Full Configuration window. The RPF
Parameters dialog box is displayed:
3
Configure the following parameters:
•
Select the Start from factory defaults checkbox if you want to save the
factory default settings as your new parameters.
•
Do not select the Start from factory defaults checkbox if you want to save
your current configuration except for parameters in the RPF file.
•
Group: Not relevant.
•
Destination Chip Serial Number: Not relevant.
•
Click OK.
Firmware and Parameters Update
30
