INSTALLATION GUIDE
11/9/12
3DHD VISION SYSTEM
6
MARKETING COMMUNICATIONS
Loosen
Run the HD-SDI video cables through cart extension channel as shown in
Figures 13 and 14
:
Figure 13
Figure 14
Right angle end goes to the CCU (middle shelf).
Reinstall plastic cart column covers.
Unpack Sony 3D monitor.
Inspect for any damages including cosmetic damages.
Vesa Mounting pattern on back of the Sony* monitor, once unpacked should
look like picture shown in
Figure 15:
Figure 15
Where Shown:
Loosen the top 2 middle screws
Remove the bottom 2 screws where shown in
in
Figure 16.
Figure 16
Sony is a registered trademark of Sony Corporation of America.
Vesa Mounting is a trademark of Video Electronic Standards Association.
Remove
