5.6 Outputs
The C1000LP has 2 outputs that can be set to H-Bridge output or open collector out-
put. By default is the C1000LP set to H-Bridge output with Lock delay in 5 seconds.
To configure the output settings use the following steps:
○
●
○
○
●
●
sets the output 1 time in Pulse mode or Lock delay
sets the output 2 time in Pulse mode or H-Bridge time
sets the output 1 active position
sets the output 2 active position
sets the outputs functions
select the outputs for Daycode/onetime code
Please use the configuration scheme under “03” section for correct navigation for OC
setup
Note:
In time setting for Pulse mode it is in Milisec x 10 instead of hours.
10
#
Key in the
Service code
#
Key in
03
1
2
3
4
5
6
