3
1. Introduction
C1000LP is a low power keypad that works on electroninc locks with open collector
and/or H-Bridge mode.
In standby mode is the yellow LED is lit (
●
○ ○)
By correct code lights yellow and green LED (
●
●
○)
By incorrect code lights the red LED (
○ ○
●
)
C1000LP has a buzzer for indicating while keying, correct code, incorrect etc. and 2
transistor outputs, independant from each other, so the C1000LP can give access by
code.
The C1000LP is a stand alone unit, the can be programmed directly by Master code
and Service code.
2. Installation
Mount the reader on a even surface.
Connect the wires to power supply, door strike etc. (use supplied diode)
Wire colours
Note:
Right after applying the voltage all LED’s lights and the buzzer sounds
do not
touch the reader untill the yellow LED lights and the buzzer is silent.
2 - 16 VDC
0V GND
Output 2 open collector, 500 mA, 0V active
Output 1 open collector, 500 mA, 0V active
REX (IN2)
Feedback (IN1)
External controlling red LED, 0V active
External controlling green LED, 0V active
1
3
5
7
9
2
4
6
8
0
