5.7 Special settings
These settings is used to change the C1000LP’s special functions such as turning the
buzzer on/off etc.
To change these settings, key in:
= Service code without timeout (
●
= inactive /
●
= active)
= Master code be changed by Master code (
●
= inactive /
●
= active)
= Mute reader (
●
= Off /
●
= On)
= Bell on OC1 (
●
= Off /
●
= On)
= Onetime code (
●
= Off /
●
= On)
= Day code (
●
= Off /
●
= On)
= Locker mode (
●
= Off /
●
= On)
= Locker release on renew time (
●
= Off /
●
= On)
Special positions
User position 191 to 197 can activate special setting 3 to 6 with a code. The program
-
ming is the same procedure as programming a user code just use the positions men-
tioned below:
191 = Toggle buzzer
194 = Toggling the star key to activate output 1 (white wire)
195 = Toggle onetime code mode
196 = Toggle Daycode mode
197 = Deactivate the user codes
198 = Seed code
199 = Digit count for one/day code
To save the settings press
or press
to go back to the previous step
(no saving).
Note:
In case of power disruption the special functions will go back to the setup made
by service code.
11
#
04
●
○ ○
1
2
3
4
5
6
#
*
7
8
