Copyright © 2014 congatec AG
IGX1m02
95/134
18.9
HDD Security Configuration
18.9.1
HDD Password on Boot
Specifies whether a hard disk user password must be entered during every boot process.
Disabled
It is not necessary to enter a hard disk user password during the boot process.
Enabled
Entry of a hard disk user password is required during every boot process.
18.10
HDD n / HDD-ID
Opens a submenu with information about the hard disk user password.
18.10.1 HDD Password Description
Allows the hard disk user and master passwords to be set, changed and deleted. The hard disk user password must be set up before the
Enabled Security setting can be carried out. The hard disk master password can only be changed if you have successfully unlocked it in
POST with the hard disk master password.
18.10.2
HDD Password Configuration
Shows the current security status of the hard disk.
18.10.3 Security Supported
Yes
is shown here if the device supports use of a hard disk user password. In this case it is possible to assign a password to the hard
drive.
18.10.4 Security Enabled
Yes
is shown here if either a hard disk user password or a hard disk master password has been assigned to the hard disk.
