Copyright © 2014 congatec AG
IGX1m02 85/134
17.11.1 Serial Port
Specifies whether the serial port is available.
Disabled
The serial port is not available.
Enabled
The serial port is available.
17.11.2 Device Settings
Shows the base I/O address and the interrupt used for access to the parallel port.
17.11.3 Change Settings
Specifies which base I/O addresses and which interrupts can be used by the BIOS
or operating system for the particular serial port.
Auto
The base I/O address and the interrupt are automatically
assigned
.
IO=2F8h;
IRQ=3;
The basic I/O address 2F8h and the Interrupt 3 are firmly
allocated
.
IO=3F8h; IRQ=3,4,5,6,7,9,10,11,12;
The base I/O address is permanently assigned.
IO=2F8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=3E8h; IRQ=3,4,5,6,7,9,10,11,12;
IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12;
The values given in the list are available for the interrupt for automatic selection
by the BIOS or the operating system.
If conflicts with other devices occur
,
this option should be converted to
Auto
.
17.12
Parallel Port Configuration
Opens the submenu to configure the parallel port (LPT).
