Copyright © 2014 congatec AG
IGX1m02 75/134
17.3
Graphics Configuration
Opens the submenu for configuring the graphics controller on the system board.
17.3.1
Primary Display
Specifies the image source during the Power On Self Test (POST).
Auto
If the display adapter is inserted, this is used as the image source during the
POST
.
Otherwise, the graphics device
(IGD) integrated in the system board is used.
IGD
The Integrated Graphics Device (IGD) on the system board serves as the only
image source during the POST
.
PEG
If the PCI Express display adapter is inserted, this is used as the image source
during the POST
.
Otherwise the IGD is used.
17.3.2
Internal Graphics
Use this option if you wish to use a PCI or PEG card as the primary image source and the graphics controller on the system board (IGD-Integrated
Graphics Device) as the secondary image source.
Disabled
If it is not used as the first image source, the IGD is disabled and is not available
to the operating system.
Enabled
If the IGD is not used as the primary image source, it can be used for operation
with several monitors after the POST
.
17.3.3
IGD Memory
Configures the size of the main memory used for the graphics controller on the
system board (Integrated Graphics Drive
-
IGD).
32M...1024M
The set value specifies the size of the shared memory available to the integrated
graphics in megabytes.
17.4
LVDS Configuration
Opens the submenu to configure the LVDS interface for direct connection of an LCD panel.
