Copyright © 2014 congatec AG
IGX1m02
90/134
18.4
User Password on Boot
Specifies whether a user password must be entered before the boot process.
On Every Boot
Entry of a user password is required before every boot process.
Disabled
The system starts without requiring the entry of a user password.
If the administrator password and the user password have been assigned and the setting
Disabled
has been chosen for this item, simply press
Enter to get USER access
to the BIOS Setup. In this case the user password does not have to be entered.
18.5
Cabinet Monitoring
Specifies whether opening of the casing should be monitored.
Disabled
The system continues to operate normally even if the casing has been opened.
Enabled
If the casing has been opened
,
then the boot process is suspended until the
BIOS Setup is called
.
If the BIOS Setup is
protected with a password, then this
must be entered. An SMBIOS event log entry will be generated.
18.6
Skip Password on WOL
Specifies whether a user password will be skipped or must be entered during
a system boot via Wake on LAN.
Disabled
The user password must be entered via using the keyboard during the system boot.
Enabled
The user password is deactivated during the system boot with Wake On LAN.
18.7
FLASH Write
Supplies the system BIOS with write protection.
Disabled
The system BIOS cannot be written. A flash BIOS update is not possible
Enabled
The system BIOS can be written. A flash BIOS update is possible.
