Congatec 049000 Скачать руководство пользователя страница 31

Страница: 31 / 75

2018

congatec

GmbH

TSCOm17

31/75

6.1.3.1

DisplayPort (DP)

The conga-TS370 offers three dual mode DP ports (DP++). These interfaces support:

•

all mandatory features of the VESA DisplayPort Standard version 1.2, including MST for monitor daisy-chaining, stereoscopic 3D frame
transport

•

maximum bit rate of 5.4 Gbps

•

High-bandwidth Digital Content Protection (HDCP 2.2)

•

AC-3 Dolby Digital, Dolby Digital Plus, DTS-HD, LPCM, 192 kHz/24 bit, 8 channel, Dolby TrueHD, DTS-HD Master audio formats

Note

Only two independent DP displays are supported if the VGA interface is enabled.

6.1.3.2

LVDS/eDP

The conga-TS370 offers an LVDS/eDP interface. This interface is configured in the BIOS to support LVDS by default. For eDP support, go to
Advanced -> Graphics -> Active LFP Configuration of the BIOS setup menu and select “eDP”.

The LVDS

interface supports:

•

single or dual channel LVDS (color depths of 18 bpp or 24 bpp)

•

integrated flat panel interface with clock frequency up to 112 MHz

•

VESA and OpenLDI LVDS color mappings

•

automatic panel detection via Embedded Panel Interface based on VESA EDID

1.3

•

resolution up to 1920x1200 in dual LVDS channel mode

The eDP

1,2

interface supports:

•

eDP 1.4 specification

•

Spread-Spectrum Clocking

•

eDP display authentication

Note

The LVDS/eDP interface does not support LVDS and eDP signals at the same time.

The eDP interface does not support HDCP

Содержание 049000












































































Результаты поиска

Содержание 049000

Отзывы:

Похожие инструкции для 049000

Бренды по названию

Популярные бренды

Congatec 049000, Руководство пользователя

Результаты поиска

Содержание 049000

Отзывы:

Похожие инструкции для 049000

Бренды по названию

Популярные бренды