Conel CDA 70, Руководство пользователя

Страница: 18 / 38

CDA70 MODEM DESCRIPTION
18
2.9. Configuration of radio modem
The Radwin configuration program [1] has been designed to set up the CDA70 radio
data modem. The software is created for MS WINDOWS NT/98/ME/2000/XP/Vista platforms.
See
User manual - Radwin software for description of the software. A service cable is
designated to connect the modem with a PC. After the service cable is connected to any of the
three RS232 serial ports and the service SW runs on the connected PC, it is possible to
execute not only all the needed radio modem settings but service interventions in the radio
data network as well.
Data cable KD-2
2.10. Service cable
CDA70 - PC connection cable with DCR and GND signals connected at 100 Ohm. It is
made from normal data cable by adding service interconnection. It is necessary to
interconnect all eight signals between CDA 70 and PC. See description of the RJ45 connector
in chapter
2.5.1 .
Service interconnection to the data cable