Condux Tesmec RS20, Руководство пользователя и инструкция по безопасности

Страница: 11 / 42

11
4. Open the Ball Valve (in line with) as shown (see Figure 6)
5. Operate the pump handle until the pressure on the gauge reads approximately
450 PSI. Use caustion as the brake begins to release as the arbor bar will
begin to rotate. (Figure 7)
6. Disengage drive side pin by removing keeper pin and pulling out the drive pin.
(Figure 7 & 8)
7. Remove bearing retainer pin and lift hinged keeper to fully open position.
(Figure 9 & 10)
Figure 9. Remove Retainer Pin from Bearing
Keeper
Figure 10. Open Bearing Keeper to Fully
Open Position
Figure 7. Remove Keeper Pin from Drive Pin Figure 8. Pull Out Drive Pin
Figure 6. Open Ball Valve
Figure 7. Pump Handle until Gauge Reads
450 PSI