Condux Tesmec RS20, Руководство пользователя и инструкция по безопасности

Страница: 5 / 42

5
▪ Maintenance personnel must wear suitable clothes to reduce the possibility of
entanglement in the machine’s moving parts. They should avoid the wearing of
chains, and other jewelry for the same reason. Operators must use personal
protective gear (i.e. gloves, booths, helmet, etc.).
▪ All maintenance operations, both scheduled and repair must be carried out
per the instructions included in this manual or following technical instructions
provided by the manufacturer. Failure to follow these instructions relieves the
manufacturer from any responsibility and voids their warranty.
E. MACHINE USAGE
▪ The machine must not be used for the following:
▪ For lifting person and/or goods.
▪ For tensioning or pulling.
▪ In a location where the machine cannot be positioned and anchored in a proper
way.
▪ In areas with brush or other materials that can be easily set on fire.
▪ In closed/unventilated sites or those poorly ventilated (tunnel or similar).
▪ At sites where fuels or explosives are present.
▪ For structure demolition.
▪ For the pulling of elastic elements.
▪ With over-ridden or broken safety system devices.
▪ For handling trucks or other movable equipment.
F. RESPONSIBILITY
Use of the reel stand in situations different from those indicated (Typology and using
field), or not described in this manual, is to be considered extremely dangerous and/
or forbidden. Persons not using recommended restraints cause a situation of improper
use, and relive the manufacturer from any responsibility for accidents, injuries to per-
sons or damage to property. The manufacturer’s warranty is also voided. Similarly the
manufacturer’s responsibility ends when the following situations occur:
▪ Tampering and/or modifying of the system without the manufacturer’s written
acceptance (in this case the operator becomes the manufacturer assuming all
obligations and responsibilities, both civil and penal).
▪ The use of non-original spare parts.
▪ Poor maintenance.
▪ Use with disconnected or over-ridden safety devices.
▪ For the connection to machine and/or plans not produced and not directly au -
thorized by the manufacturer in a written acceptance.
G. OPERATORS MANUAL
▪ Information contained in this manual applies to all the operators charged with
the use and/or the maintenance of this machine